Tag Archives: wire frame

A New way to use Photogrammetry (as a design tool)

Wireframe model projected accurately back into photograph

Typically I use photogrammetry to measure and draw existing structures.  Recently I’ve started using it also to visualize new structures. The photo above shows an image that was used originally to create a set of measured drawings of an existing house.  Once I had those drawings completed I designed a new structure to be built above the foundation of an existing garage.  I made a simple 3-D model of the new design and then accurately projected the model back into the photograph. This has been an invaluable tool in getting my client to understand the new design.

Alternate View

More on this new way of working to come…

Discovering Photogrammetry in France

I first encountered the concept of architectural photogrammetry while working as an architect in Paris in 1990 -and was immediately intrigued. So much so that I decided to swap my job with a 45 minute commute into the city for a new job just a short bicycle ride away (in the town of Egly)  in order to learn how to do this work.  Simultaneously I had to learn how to draw with a computer; up until then I had only drafted with pen and pencil (plastic leads for working drawings).  It was a lot to take in, but I think its fair to say that I loved it.

digitizing puck

digitizing puck

Back then, the process was nearly completely analog: We shot film and had it developed into 8″x10″ prints.  These were then taped onto a large format digitizer so that points on the photos could be communicated to software running on a PC.  Then after a photogrammetric analysis of this information was completed, we made drawings that were plotted to scale – and it was these prints that were the “deliverable” product desired by our clients.

I remember seeing a number of photos taped onto a digitizing table and watching my colleague Herve use the digitizing puck to point to the same location on a building as seen from various points of view and then push a button and seeing the point location appear in 3-D coordinates in an CAD drawing on a computer screen.  It seemed magical.

As more and more points were measured in this way, I could start to see the shape of the building.  This became even clearer as points were connected into lines and polylines; the “point cloud” was becoming a “wire frame”.

When I first got out of architecture school and was working for a firm in New York City, the first thing I had to do was to learn how to make measured drawings of existing conditions.  It was messy, confusing work on site and often yielded error-ridden results in the office that required repeated return visits to understand and clarify what was really happening architecturally.  When I saw a dimensionally accurate 3-D model representing an existing structure being created from a handful of photos, I was hooked.  Nobody I knew was doing anything like this in the United States.


Triumphal Arch Jardin de Tuileries

Triumphal Arch Jardin de Tuileries