Tag Archives: as found

As found drawings

"As Found"

There is a distinction between “as found” drawings (drawings that depict the reality of an existing building as it is “found” today) and drawings that were “found” in a search to locate historical documentation about a building. This is not to knock the value of original drawings that are sometimes available when working on an historic structure. Its just a reminder that original drawings do not always provide accurate descriptions of what was built. Depending on when and how the building was constructed, design drawings sometimes were more like polite suggestions.

The other issue with “found” drawings is how they are converted into CAD drawings or BIM models. Care must be taken to avoid a messy foundation for preservation work.

Stone Barn at Morven Park

Here I am posting a composite elevation of a portion of the stone barn at Morven Park in Leesburg, VA.

Composite Elevation with two of the three images faded to 50% opacity

The “elevation” is actually a composite of three images, each rectified to respect the scale of 1:96 (or a quarter inch equals a foot) when printed at 300dpi. The individual images are posted below.

partial elev left qtr scale at 300dpi

partial elev center qtr scale at 300dpi

partial elev right qtr scale at 300dpi

Childs Restaurant -2

Sheet 1 with rectified images "thawed"

Sheet 2 with rectified images "frozen"

Childs Restaurant

Sheet 3 with some rectified images "thawed", others "frozen"

completed line drawings

Trinity Episcopal Church

Overview of Sheets prepared for Trinity Episcopal Church in Renssalaerville, NY

Drawing with a few rectified images "unfrozen" in the AutoCAD drawing.

more progress

Drawing laid out on six sheets to include exterior and interior elevations, plans and building sections

Mosaic Images from multiple view points simultaneously

Maria Mitchell Hybrid Drawing

Maria Mitchell Hybrid Drawing

Above is what I like to call a “hybrid drawing” of the historic Maria Mitchell House located on the island of Nantucket. A hybrid drawing is one of two things, or possible both: It is a photographic image that behaves like a measured drawing (it is scalable and can provide quantifiable data), or it is a measured drawing that is rich in the way a photographic image is (materials, colors, actual as-found existing conditions are depicted photographically).

Line drawing with key to individual rectified images

Line drawing with key to individual rectified images

Above is a view of the line drawing with all of the rectified images that compose the hybrid drawing “frozen”. In other words, in the CAD drawing, these layers of information are turned off and made invisible so as to see just the line-work itself and a series of polygons that correspond to bit map/raster images that are referenced by the drawing.

Below are a series of images showing each individual rectified photographs as it is situated in the context of the drawing.  These added together make the composite image at the top of this post.

Maria Mitchell 10Maria Mitchell 9

Maria Mitchell 8Maria Mitchell 7Maria Mitchell 6Maria Mitchell 5

Maria Mitchell 11

Franklin & Marshall Exterior Survey

Old Main at Franklin and Marshall

Old Main at Franklin and Marshall

Last spring I did some work at Franklin and Marshall College in Lancaster, PA.  I prepared a combination of measured drawings in CAD linked  to rectified photographs of the three oldest structures on the campus. These were then used as base documentation for an assessment of the existing conditions of the masonry surfaces across the extent of these buildings’ exterior facades.

The sequence of this work went roughly as follows:  I first shot photos of all of the buildings from points of view available on the ground (using a specially calibrated digital SLR).  Back in my offices in Virginia I used photogrammetric software to “back calculate” the camera stations and to make precise 3-D measurements of points on the three structures.  I used this dimensionally accurate point cloud as a reference to create rectified photographs of the surfaces visible from grade.

F and M Old Main Rear Elevation

F and M Old Main Rear Elevation

Using the point cloud and the rectified photographs I then created measured line drawings of the structures and laid them out onto tabloid size sheets for use in the field.  These were taken by hand up into an aerial lift so that conditions could be noted with a fair degree of accuracy once assessment were made both visually and manually.

tabloid size field sheet with notes

tabloid size field sheet with notes

Once the assessment was completed the data recorded on the field sheets was entered in the CAD drawings.  At this point the line drawings in CAD were enriched by a mosaic of rectified photographs visible inside of AutoCAD.  This allows for an accurate transfer of notes from the field to eventual construction documents.  A sketch of an area or region can be transferred to CAD and become dimensionally reliable.  This is a very important step because it provides for an accurate tally of areas to be treated in one way or another.

aerial lift

aerial lift

Since the main structure was rather tall, I also returned to the site to go up in the aerial lift to collect more photographs to further enrich my drawings with better rectified images of areas that were either blocked by vegetation, neighboring buildings, or were too foreshortened to provide good rectified images.

F and M Old Main Rear Elevation with photos

F and M Old Main Rear Elevation with photos